3 installing/removing the 7h02-06 module, 1 installing the 7h02-06 module in a 7c03 mm, 3 installing/removing the 7h02-06 module -3 – Cabletron Systems 7H02-06 User Manual

Page 21: 1 installing the 7h02-06 module in a 7c03 mmac

Text mode
Original mode

Installation

3-3

Figure 3-2. Installing an FEPIM

3.3 INSTALLING/REMOVING THE 7H02-06 MODULE

The 7H02-06 Module is installed in: the 7C03 MMAC SmartSwitch,
the 7C04 Workgroup SmartSwitch or the 7C04-R Workgroup
SmartSwitch by using the following steps and referring to the
appropriate figure.

3.3.1 Installing the 7H02-06 Module in a 7C03 MMAC

SmartSwitch

The

7H02-06

Module cannot be installed in the left most slot of the

7C03 MMAC SmartSwitch. That slot is reserved for the 7X00
SmartSwitch Controller Module.

Note:

Before installing the 7H02-06 Module, attach the wrist strap
included with the module (instructions are printed on the packet).

To install the

7H02-06

Module in a 7C03 MMAC SmartSwitch,

follow the listed steps and refer to Figure 3-3.