CFM Corporation 7000 - Manual (Page 19)

Locate these parts:
1. Working from behind the grill, set the
cylinder into the large round opening in
the grill base.
2. Position the cylinder-retainer wire around
the cylinder collar as shown.
3. Insert the left end of the wire into the
small opening in the base.
4. Flex the right side so that it fits into the
opposite opening on the right side of the
base.
Installing an L.P. Gas Cylinder.
no tools needed
cylinder
retainer
wire
( 1 )
19
WARNING: Connect the L.P. cylinder to
the grill outdoors only.
Fill the cylinder before connecting.
Read and follow all directions on the cylin-
der and fuel hose safety tags.
grease pan
( 1 )
L.P. gas
cylinder
( 1 )
1.
(To see this better, the grill is shown clear.)
2.
3.
4.
(Behind and below the grill bottom.)