CFM Corporation 7000 - Manual (Page 12)

Locate these parts:
tools needed:
3 ⁄
8
" open-end wrench
7 ⁄
16
" open-end wrench
12
1. Place the heat shield on the pillar,
aligning holes as shown.
2. Position the grill bottom onto the pillar
so that the rear hinge struts are toward
the open side of the pillar, as shown.
3. Four holes in the grill bottom will align
with the four holes in the heat shield
and the pillar.
hinge strut
back
Assembly Step 3 • Attach the Grill Bottom.
grill bottom
( 1 )
1/4-20 x 1”
( 4 )
1/4-20
( 4 )
Use hardware bag “B”:
heat shield
( 1 )
heat
shield