Zipper’s highflow & maxflow air filter kits, Maxflow stage i ac upgrade kit for evolution, Style cover – Zipper's Performance MaxFlow Air Filter Kits User Manual
Page 2: Covers for maxflow air cleaners, Complete highflow air filter kits

Zipper’s Performance Products
6655-A Amberton Drive, Elkridge, MD
Phone: (410) 579-2828 Fax: (410) 579-2835
www.ZippersPerformance.com
Zipper’s HighFlow & MaxFlow Air Filter Kits
Products on this page are not for use on pollution controlled vehicles.
MaxFlow Stage I AC Upgrade Kit For Evolution
®
Style Cover
These kits are very similar to the Twin Cam
®
MaxFlow upgrade kits listed above except they are designed with
the fi lter tapering outward towards the air fi lter cover, allowing use of 8” diameter EV-style round covers. Can
be used on Evolution
®
or Twin Cam
®
engines if the appropriate EV-style cover is used.
Covers For MaxFlow Air Cleaners
PART NO. COVERS FOR 7” EV-STYLE MAXFLOW
#150-291
#150-400
#172-794
#172-795
#172-770
#172-800
#172-771
(A) 8” full air fi lter cover, chrome
(B) 8” full air fi lter cover, gloss black
(C) 8” open cover, chrome scalloped
(D) 8” open cover, chrome smooth (billet)
(D) 8” open cover, chrome smooth (steel)
(E) 8” open cover, chrome ball milled
(F) 8” open cover, wrinkle black (steel)
#162-295
#162-294
#162-297
Fits carb EV 80” engines equipped with H-D #29543-99 SE
®
air fi lter kit. This SE
®
air fi lter uses
the newer style die-cast backplate with venturi built-in and 3 separate mounting studs. Also
fi ts TC
®
with carb or cable Delphi
®
EFI when used with 8” round cover (purchase separately).
Fits carb EV 80” engines equipped with H-D #29008-90A SE
®
(pre-’99 design) air fi lter kit. This SE
®
air fi lter uses the earlier style fl at backplate with 3 threaded studs attached and a plastic venturi ring.
Fits ’99-’01 Marelli fuel injected TC engines equipped with H-D #29441-99 SE
®
air fi lter kit (4-
bolt mounting). Requires round EV type cover (purchase separately).
2014 brought a lot of changes to the Touring series bikes, including a
new, distinctive air cleaner cover shape. Zipper’s designed a new air
cleaner that retains the Rushmore cover while increasing airfl ow 47%
over the factory system. The Rushmore cover is twice the weight of
the previous ‘football’ cover so we felt it important to not only making
a substantial fl ow increase, but to retain 360 degree support of the
outer cover for durability and longevity purposes. Backing plate is
fully CNC machined from billet with radiused entry and additional
air inlet ports, fi nished in black for a stealthy, almost un-noticeable
upgrade to the intake system. Fast and easy installation; oiled gauze
HighFlow element is fully washable and re-useable, and the entire
unit is USA-made!
Zipper’s HighFlow Air Cleaner
for 2014-2015 ‘Rushmore’ Models
Fits ’99-Up Big Twin w/carb or cable operated EFI, satin fi nish
Fits ’99-Up Big Twin w/carb or cable operated EFI, black fi nish
Fits ’99-Up Big Twin w/carb or cable operated EFI, chrome fi nish
Cover spacer, required for ‘08-up FXD w/ factory teardrop cover
Replacement HighFlow element only for 117-442 series kits
Fits ’08-’13 Big Twin w/throttle by wire EFI, satin fi nish
Fits ’08-’13 Big Twin w/throttle by wire EFI, black fi nish
Fits ’08-’13 Big Twin w/throttle by wire EFI, chrome fi nish
Replacement HighFlow element only for 117-449 series kits
These kits are similar to the MaxFlow air fi lter kits except the fi lter is the standard 2-1/4”
deep. This fi lter kit increases fl ow without increasing the overall width of the air cleaner
for those with leg room concerns. Fits fuel injected and carbureted Twin Cam
®
engines
equipped with the factory TC “football” cover. Available with satin aluminum, black or
chrome plated breather ports.
Complete HighFlow Air Filter Kits
#117-442
#117-442B
#117-442C
#150-591
#172-116
#117-449
#117-449B
#117-449C
#172-128
PART NO. DESCRIPTION
Black, fi ts 2014-2015 Touring models with ‘Rushmore’ cover
#117-460
PART NO. DESCRIPTION
PART NO. DESCRIPTION
#117-449C