YSI 52 - Manual (Page 21)

Operation Section 5
5.8 ERASING THE MODEL 52 MEMORY
To erase the entire memory of the Model 52, set the function switch to O
2
-TEMP and
press the À key until a display similar to the following appears:
7 . 0 m g / L 2 3 . 4 C
E r a s e M e m o r y ?
Caution: All data stored in memory will be lost forever!
Press CONFIRM while the above display is visible. A display similar to the following
will appear:
E r a s e D a t a ? N o
If you do not wish to erase all of the Model 52 memory, press confirm now. If you do
want to erase all of the Model 52 memory, press the À key. A display similar to the
following will appear:
E r a s e D a t a ? Y e s
Press confirm while this display is visible to erase all of the Model 52 memory. The
message “Erasing Memory” will flash across the display. The memory of the Model 52 is
now free to record up to 70 new data points.
Press SKIP to return to non-memory operation of the Model 52.
YSI, Incorporated Model 52 17