Konica Minolta DiMAGE Xg - Manual (Page 44)

44 R ECORDING - ADVANCED OPERATION
DRIVE MODES
Single-frame advance - to take a single image each time the shutter-
release button is pressed. This is the camera’s default setting.
Self-timer - to delay the release of the shutter (p. 46). Used for self-
portraits.
Multi frame - to create a composite image of a nine-frame series when the
shutter-release button is pressed once (p. 47).
Continuous advance - to take multiple images when the shutter-release
button is pressed and held (p. 45).
The drive modes control the rate and method images
are captured. Indicators indicating the selected drive
mode appear on the monitor. The drive mode is
selected in section 1 of the recording-mode menu (p.
43). If auto reset (p. 55) is active, the drive mode is
reset to single-frame advance when the camera is
turned off.