WaterChef C7000 - Manual (Page 5)

3 www.waterchef.com
1. Open the shipping carton, remove all System parts
and place them on your kitchen counter.
2. Compare them with the parts shown in this guide to be
certain all items were included (see inside front cover).
3. Unthread and remove the aerator from the end of your
kitchen faucet if it has one. (fig. A)
4. Thread the Diverter Valve directly onto your kitchen
faucet. Do not over-tighten. (fig. B)
5. If the threads to the Diverter Valve do not directly
attach to your kitchen faucet, use one of the three
Adapters provided . (fig. C)
6. Most kitchen faucets with external threads will directly
attach to the Diverter Valve. In some instances the
Diverter Valve may be smaller than your kitchen faucet.
In this case use the adapter with internal threads and
thread it directly to your kitchen faucet. Next, thread
the Diverter Valve to the Adapter. (fig. D)
7. If your kitchen faucet has internal threads, thread
one of the two Adapters with external threads directly
to your kitchen faucet. Next, thread the Diverter Valve
to the Adapter. (fig. E)
8. If your kitchen faucet does not have threads, measure
the inside diameter of the kitchen faucet and call
WaterChef Customer Care at 1.800.879.8909
(int’l +1.775.359.9500) to request an Expandable Adapter.
9. If your kitchen faucet does not fit any of the Adapters
provided, please call WaterChef Customer Care at
1.800.879.8909 (int’l +1.775.359.9500) or check with your
local hardware store.
(continued on next page)
SETUP & INSTALLATION
NOTE
This System is not recommended for installation on pull-out faucets.
A
B
C
D
E