Wampler Pedals Cranked OD - 2014 Limited Edition Overdrive User Manual
Cranked od
TM
TM
Cranked OD - 2014 Limited Edition Overdrive
Cranked
OD
Every since Wampler Pedals discontinued the original version
“Cranked AC” we have been having tons and tons of customer
requests for a re-release of that pedal. While the original sounded
pretty good – Brian knew that he could make it sound great! So after
some tinkering on the breadboard, we are proud to announce the
CRANKED. A pedal truly worthy of its name!
The Cranked picks up where the Thirty Something leaves off. This
pedal is a tribute to those famous British amps that are running wide
open. Whether at bedroom volume or full on stage rock stardom –
you can achieve truly cranked up tones at any time.
After revisiting the original unit, there just had to be some updates.
Starting with an active 3 band EQ. Now you can dial in or take out as
much of each frequency as you want; totally tonal control!
The Cranked is strictly limited edition overdrive – this is your chance
to own a piece of history, with a twist.
Input and Output: The input jack is located on the top right of the pedal, above the treble control and the
output is the other side of the power input, above the bass control.
True By-pass Relay Switch: We use a true-bypass relay because it utilizes a quieter and smoother switch
that is more reliable than traditional bypass switches. Your original tone/signal will remain unaffected
when the pedal is not engaged.
Volume: This control adjusts the output level of the Cranked. The Cranked was designed to have higher
output. This allows the Cranked to have more headroom when needed. The output volume, Gain and
Tone controls all have an impact on the total volume, so you might want to adjust the Volume after you
have dialed in the other controls. Re-adjustment might be necessary if you get it to the desired level and
still need to tweak the sound.