Cub Cadet 7532 - Manual (Page 62)

OPERATING INSTRUCTION
54
WARNING LAMPS
The lamp switch has two positions. Turn the switch clockwise to
illuminate the headlamp, rear red lamp, and instrument panel lamps.
Push the flasher control button down to operate the amber warning lamps.
When the turn signal switch is moved upward to make a right turn,
the RH warning lamp will illuminate ON and OFF and the LH lamp will
illuminate continuously.
When the turn signal switch is moved downward to make a left turn,
the LH warning lamp will illuminate ON and OFF and the RH lamp will
illuminate continuously.
When the turn signal switch is returned to the center position, both
warning lamps will illuminate ON and OFF.
IMPORTANT: When towing an implement or wagon with the tractor,
the complete rear area warning system (amber warning lamps, rear
red lamp and SMV emblem) must be easily seen by any vehicle operator
coming near the tractor.
FLASHER
CONTROL BUTTON
CONTROL BUTTON LAMP
SWITCH
TURN
SIGNAL
SWITCH
FLASHER
CONTROL BUTTON
LAMP
SWITCH
TURN
SIGNAL
SWITCH