Visual Sound VS-XO - Manual (Page 2)

Overdrive 2:
Typical Drive, Tone (high boost / cut)*, and Volume knobs, plus
* The Tone knob is slightly different than a typical overdrive tone control in that it
boosts gain slightly as it boosts highs when turned toward maximum.
Internal Buffer On/Off:
If you open the pedal, you will see a slide switch for each overdrive
which allows you to turn on/off the Pure Tone buffer circuit. We recommend that you leave the
first channel buffer on. However, if you want pure true bypass switching, you may turn both
switches off.
IN and OUT:
Use the Bass knob to go from bass cut (minimum setting) to bass boost (max.
setting), or anything in between.
Normal
IN OUT
IN #1 OUT #1
IN #2
OUT #2
Change
Order
IN
Overdrive 1
OUT
Overdrive 2
OUT
Overdrive 1
IN
Overdrive 2
Separate
Pedals
For demos, sample settings and assistance, please go to:
www.VisualSound.net