Verity Audio Lohengrin IIS - Packing / Unpacking Instructions for Monitor - Manual

1005 Saint-Jean-Baptiste, Suite 150
Quebec, QC G2E 5L1 Canada
Tel: (418) 682-9940
Fax: (418) 682-8644 www.verityaudio.com
[email protected]
2004.06.30
Lohengrin
Upper Module Packing Instructions
The packing accessories are:
i. (2) ATA approved flight cases;
ii. (2) Fabric covers.
Each upper module flight case has four locking latches and it
provides space for:
i. (1) Upper module cabinet;
ii. (1) Granite isolating platform.
1. Remove the two connector posts from the upper module.
Place them aside for later instructions;
2. With the help of a second person, open and completely
remove the upper shell of the flight case. Then, bring the
bottom of the flight case next to the upper module
cabinet. Make sure to match the serial number of the
upper module with the flight case;
3. Cover the upper module with the supplied protective
fabric bag. The bottom elastic band should surround each
corner of the cabinet.
4. Insert one granite platform at the bottom of the flight case;
5. With the help of a second person, take the upper module
cabinet and carefully install it inside the flight case;
6. Repeat step 1 to 5 for the second module;
7. Place the two connector posts inside the plastic box
provided in the lower module flight case;
8. With the help of a second person, carefully install the
flight case cover by matching the two black pop rivets
together. Locking the latches with tie wraps is highly
recommended;
9. The Lohengrin’s upper modules are ready to be addressed
and shipped.