Veracity OUTREACH LITE - Manual (Page 2)

EC Declaration of Conformity
In accordance with EN 45014:1998
We, Veracity UK Ltd. of 6 Barns Street, Ayr, KA7 1XA
declare that the equipment “OUTREACH” Ethernet repeaters
model number VOR-ORM / VOR-ORL
conform to the essential protection requirements of the EMC Directive 89/336/EEC as amended.
The following EMC standards have been applied:
BS EN 55022:1998 Emissions (Class B Radiated)
BS EN 55024:1998 Immunity (BS EN 61000-4-2:1995 Immunity to ESD,
BS EN 61000-4-3:2000 Immunity to Radiated RF Fields (3V/m))
I hereby declare that the equipment named above has been been found to comply with the relevant sections
of the above referenced specifications. The unit complies with all essential requirements of the EMC Directive.
Responsible Person Mr Alastair McLeod, Director
Issued 9th October 2009 at Ayr
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Example OUTREACH MAX / OUTREACH LITE applications
1. Delivering 20 watts to a PoE Plus device over 300 metres (984 feet)
More than one OUTREACH Max may be connected in series to extend PoE and Ethernet for several hundred metres. In the example above,
Veracity's OUTSOURCE PLUS injector is used to add enhanced PoE Plus capability to a regular unpowered network port.
Two OUTREACH MAX units are located 100 metres and 200 metres from the switch, allowing a PoE Plus wireless access point to be installed
up to 300 metres from the power source.
2. Extending an unpowered network connection to 200 metres (656 feet)
The combination of Veracity's OUTSOURCE enhanced PoE injector and OUTREACH LITE Ethernet range extender delivers a simple and reliable
means to extend LAN cabling beyond its 100 metre limit.
By connecting a single OUTREACH LITE after 100 metres of cabling, the connection from network switch port to wall outlet may extend up to
200 metres. OUTSOURCE delivers power to the OUTREACH LITE, and may be conveniently located near the network switch.
3. Combining OUTREACH LITE and OUTREACH MAX to deliver an unrestricted network connection beyond 200 metres
For extending data-only connections, where no PoE is required for the end device, a combination of OUTREACH MAX and OUTREACH LITE may
be used to increase range beyond 200 metres. The OUTREACH MAXes forward both data and PoE from the PoE switch to the powered device,
which in this case is the OUTREACH LITE. The total distance from switch to outlet in the example is up to 400 metres (1316 feet).
Unrestricted 100Base-T full-duplex (total bandwidth 200Mbit/s) connections of up to 2200 metres (7218 feet) between power sources are
possible using this method.
4. Versatile network expansion with distributed PoE using OUTREACH QUAD
In this example an OUTREACH MAX is used to forward enhanced PoE Plus power to an OUTREACH QUAD PoE-forwarding switch, located up to
200 metres from the network switch and OUTSOURCE PLUS injector.
The OUTREACH QUAD extends the PoE and network connection a further 200 metres to an IP camera using OUTREACH MAX, and provides a
PoE network port for a VoIP phone, plus an additional two network connections for other devices or for connection to a local network.