VACUUBRAND MZ 2C VARIO - Manual (Page 27)

page 27 of 51
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 999034 / 22/04/2008
To chose a pressure value for automatic switching off is
only possible if automatic switching off is activated (in mode
vacuum control with automatic).
➨ Press key MODE simultaneous with ▼ (arrow down).
☞ When the key is pressed shortly, the current pressure for
automatic switching off is displayed for one second (”AE”, i.
e. automatic switching off is preselected at the factory). With
a second tip within one second or continuous pressing:
➨ Select pressure for automatic switching off by using keys ▲
or
▼ (pressure selectable in a range from 1 to 1060 mbar or
”AE”; ”AE”, i. e. automatic switching off is active if a pres-
sure value < 1mbar is selected).
☞ The pressure is stored as new pressure for automatic switch-
ing off when the key is released.
Automatic switching off
MODE
30
mbar
Changing to mode continuous pumping
➨ Press key MODE simultaneous with ▲ (arrow up).
☞ Switching to continuous pumping is only possible, if vacuum
control is not activated (after pressing key START/STOP).
MODE