Assembling of components, Replacing the filter, Atmospheric pressure – VACUUBRAND BVC basic G User Manual
Page 23
page 23 of 35
Assembling of components
atmospheric
pressure
Midi
sart® 2000
0.20
µm PTFE
IN
sartorius stedim
Replacing the filter
Remove connecting tube from the filter. Re�
move the filter from the piece of tube at the
hose nozzle.
Vent the system.
Ensure that there is no liquid in the tube to avoid
risk of contamination.
Attach new filter.
Observe flow direction. Position filter with the
printed side “IN” towards the bottle.
Attach the connecting tube.
This manual is related to the following products:
See also other documents in the category VACUUBRAND Pumps:
- 8-channel tip adapter with ejector (29 pages)
- BVC 21 NT (31 pages)
- BVC 01 (27 pages)
- BVC control (27 pages)
- BVC control (68 pages)
- HP 40B2 (20 pages)
- PC 101 (26 pages)
- PC 101 NT (74 pages)
- PC 2001 VARIO (49 pages)
- PC 2001TE VARIO (50 pages)
- PC 2002 VARIO (51 pages)
- PC 2002 VARIO without controller (25 pages)
- PC 2008 VARIO (51 pages)
- PC 3001 TE VARIO (120 pages)
- PC 3001 TE VARIOpro (120 pages)
- PC 3001 basic (27 pages)
- PC 3001 basic pro (54 pages)
- PC 3002 VARIO (75 pages)
- PC 3002 VARIO plastic housing (129 pages)
- PC 3002 VARIO without controller (o.C.) (76 pages)
- PC 301 (40 pages)
- PC 3010 NT VARIO (145 pages)
- PC 3010 NT VARIO o.C. (97 pages)
- PC 3012 NT VARIO Duo (151 pages)
- PC 500 LAN (46 pages)
- PC 500 LAN NT (102 pages)
- PC 510 (48 pages)
- PC 510 NT (63 pages)
- PC 510 NT plastic housing (113 pages)
- PC 8 m. MD 12C (49 pages)
- RP 12C (29 pages)
- VacuuHandControl VHCpro (36 pages)
- Exhaust waste vapour condenser Peltronic (41 pages)
- MD 1 (68 pages)
- MD 12 (51 pages)
- MD 12 NT (70 pages)
- MD 12 NT VARIO (126 pages)
- MD 12C (52 pages)
- MD 12C NT (92 pages)
- MD 1C (87 pages)
- MD 4 (22 pages)
- MD 4 NT (91 pages)
- MD 4 NT VARIO (106 pages)
- MD 4 VARIO (41 pages)