USL DAT-100 - Manual (Page 8)

- 8 -
Source
Pressing the source button advances the source selection to the next source. The
DAT-100 can output a 1kHz tone at -20dBFS, pink noise, and a spoken channel
identifi er. The source LEDs indicate which type of sound is currently being output.
The spoken channel identifi er speaks the channel name (ie, L, LC, C, RC, etc.) or
number (9, 10, 11, etc.) in English.
The SW channel produces a 100Hz tone at -20dBFS in the tone and channel iden-
tifi er source modes.
Battery Indicator
The battery indicator glows steadily when the DAT-100 is on. If the indicator fl ash-
es, the batteries are low and need to be replaced or recharged.
Charger
As an option, the DAT-100 is available with rechargeable NiMH batteries and an
external charger. To recharge the batteries, turn off the DAT-100, plug the charger
in to the DAT-100, and the charger into an AC outlet. The charger has an LED that
is red when the battery is charging and green when the battery has completed
charging. The LED is also green when the charger is not connected to the DAT-
100. Users may want to connect the DAT-100 to its charger each night to ensure
the batteries are fully charged for the next day’s use.
Use only the USL supplied charger and only with
rechargeable batteries. Use of other chargers or bat-
teries may damage the charger, the batteries or the
DAT-100.