TYREDOG TD-1300A-X5 Owners Manual - Manual (Page 17)

16
As each sensor is fitted to the respective tyres, the monitor will display the
pressure for that sensor. It is normal for the monitor to warn of high or low
pressure upon initialisation because the warning thresholds are yet to be set.
If a pressure fails to be shown on screen, try the sensor on a different tyre to
ensure there is not fault with the valve.
Assembling the mounting bracket
Screw the monitor arm to the base you have chosen making sure the ball
joint is seated correctly in the socket.
Hook the bracket into the slot at the rear of the unit and tighten the screw.
Adjustments can be made by using the angle adjustment and the pivoting
ball joint on the mounting base.