TYREDOG TD-1300A-X5 Owners Manual User Manual

Page 15

Remove the sensor cap and insert the battery like shown.

The LCD monitor will beep, and the corresponding display for that sensor

flash, alternating between ‘Lo.P’ and ’00.0’.

Replace the battery cover and ensure it is screwed on tight.

EG: Sensor RL is online, but no pressure is detected.

This is indicating that the sensor is online, but not yet mounted. Repeat this

process with the remaining sensors until all sensors are online. If any

sensors fail to come online, please try a battery from another working sensor,

or consult your nearest Tyredog dealer. Once all sensors are online, proceed

to fitting the sensors to your tyre valves.

Blinking