Triner Scale TS 700-MS Series 2 - Manual (Page 11)

User’’s Guide | TS-700 MS
9
Parameters and Settings
CAUTION: Use care when accessing and
adjusting your indicator’’s parameters.
Several parameters can be accessed that,
if altered, will change your indicator’’s
operations.
TO ACCESS AND ADJUST THE TS-700 MS
PARAMETERS:
Press the PRINT and HOLD keys. ““C”” will
display. Release the keys. ““C08”” will display,
with the 8 flashing. The digit flashing is the
active digit, and can be adjusted up or down* by
using the ZERO/UP ARROW or TARE/DOWN
ARROW key. Use the KG-LB/LEFT ARROW
key and the TARE/RIGHT ARROW KEY to
change which units digit is active (flashing).
*TIP: Parameters C01 through C07 are
locked out, and are only accessible by
scale technician during calibration.
Navigate to the setting parameter you wish to adjust
and use the arrow keys to change the settings
values. Press the PRINT ( ) key to accept your
settings, then press the TOTAL ( ) key to exit.
EXAMPLE: To adjust the date setting in
parameter C16:
With ““C08”” flashing, use the left arrow key
change the active digit from the 8 to the 0
(the 0 will flash).
Use the up arrow key to increase the 0
to 1.