Triner Scale TS-20KD-1010 - Manual (Page 6)

Final Calibration
Calibrate the scale system with a minimum of 5,000 lbs of test weight per the digital
indicator manual.
Packing List
Item Description
Qty Check
Platform Weldment #1 (Female) 1
Platform Weldment #2 (Male) 1
15” Side Ramps 3
15” Side Ramp with Cable Exit Notches 1
15” or 30” Approach / Exit Ramps (Left) 2
15” or 30” Approach / Exit Ramps (Right) 2
Load Cell Stands 6
Indicator / Junction Box Stand 1
Digital Indicator with 6’ Home Run Cable 1
SBS-10K Sheer Beam Load Cells (Numbered 1-6) 6
6 Load Cell Stainless Steel Junction Box 1
5’ Ribbon Conduit 1
¾ - 10 x 2 ¼” Hex Cap Screw 12
5/8” Spherical Washer Sets 6
5/8” Flat Shim Washers 12
¼-20 x 1 Hex Cap Screw 8
¼” Flat Washer 8
¼” Lock Washer 8
¼-20 Hex Nut 8
½” x 4 ¼” Concrete Anchor Bolts with Washers and Nuts 40
¼” x 3 ¼” Concrete Anchor Bolts with Washers and Nuts 8