Trending Accessibility Adjustable fusion shower pan surface mounted on subfloor - Manual (Page 4)

Installation Guide
www.trendingaccessibility.com [email protected]
4
for adjustable fusion shower pan surface mounted on subfloors
Step 1
For optimal performance, it is imperative there is a
level surface prior to installation of new Adjustable
Pan. Check existing floor to make sure it is level. If
it is not, please correct prior to installation. Place
the Adjustable pan in desired location and check
to make sure it is level.
Step 2
Once the pan is in the desired location, holding
the pan steady, trace the inner circle of the pan
without the rotating plate inserted. You have now
marked the location of the drain on your subfloor.
Step 3
Using your mark as a guide, cut along line as
accurately as possible. Make sure to adjust the
depth of your saw to the thickness of the subfloor
to avoid cutting through the joists. It is best to use
a jigsaw to accurately cut your circle. Note: If
possible, please check or mark location of existing
plumbing and electrical to avoid damaging them.
subfloor
If you need to cut the
pan to fit into a cus-
tom location, please
refer to the cutting
and drilling guidline
on page 12 for de-
tailed directions
Step 4
Set the pan into place. We now want to make sure
that the rotating plate lines up with the waste line.
First, insert the rotating plate onto the Adjustable
Shower pan.