Trending Accessibility Fusion shower pan surface mounted on subfloor - Manual (Page 4)

Installation Guide
www.trendingaccessibility.com [email protected]
4
for fusion shower pan surface mounted on subfloors
Step 1
For optimal performance, it is imperative there
is a level surface prior to installation of new
Fusion Shower Pan. Check existing floor to make
sure it is level. If it is not, please correct prior
to installation. Place the Fusion pan in desired
location and check to make sure it is level.
Step 2
Once the pan is in the desired location, holding the
pan steady, trace the inner circle of the pan. You
have now marked the location of the drain on your
subfloor.
Step 3
Using your mark as a guide, cut a hole that is
10” in diameter. Make sure to adjust the depth of
your saw to the thickness of the subfloor to avoid
cutting through the joists. It is best to use a jigsaw
to accurately cut your circle. Note: If possible,
please check or mark location of existing plumbing
and electrical to avoid damaging them.
Step 4
Set the pan into place. Note location of the drain
and make your connections to the waste line.
Install drain in accordance with current plumbing
and building codes.
subfloor
The Standard Fusion
Pan is trimmable
up to 2” around the
perimeter.