Traxxas 48077 - Manual (Page 9)

NITRO 4-TEC 3.3 • 9
If the power indicator doesn’t
light green, check the polarity
of the batteries. Check
rechargeable batteries for
a full charge. If you see any
other flashing signal from the
LED, refer to the chart on page
36 to identify the code.
When rechargeable batteries
begin to lose their charge,
they will fade much faster
than alkaline dry cells. Stop
immediately at the first sign
of weak batteries. Never turn
the transmitter off when the
battery pack is plugged
in. The model could run out
of control.
TRAXXAS TQ i RADIO SYSTEM TRAXXAS TQ i RADIO SYSTEM
Your model is equipped with the TQi 2.4 GHz transmitter with Traxxas Link Model Memory. The transmitter has two channels for
controlling your throttle and steering. The receiver inside the model has 5 output channels. Your model is equipped with two
servos and a receiver.
NITRO 4-TEC WIRING DIAGRAM
Channel 1* - CH1
Steering Servo - CH1
Throttle Servo - CH2
Channel 3* - CH3
From Voltage/Temp Senor Port - CH4
Battery - BATT/CH5
RPM Sensor Port - RPM
Voltage/Temp Senor Port - V/T
* Not used
Antenna
On/Off
Switch
Receiver
4-Cell
Battery Holder
Channel 1
Steering Servo
Channel 2
Throttle Servo
RPM Sensor
Telemetry
Voltage Wire
Connects the V/T
port to any open
receiver port.
TRANSMITTER AND RECEIVER
Steering
Trim
Shift
Switch
Throttle
Trigger
Multi-Function
Knob
Throttle Neutral
Adjust
Steering Wheel
Power Switch
Battery Compartment
Traxxas Link
Wireless Module
Set Button
Menu Button
Red/Green Status LED
see page 36 for more info
Link
Button
LED
Sensor Expansion
Port