Traxxas 48077 - Manual (Page 3)

NITRO 4-TEC 3.3 • 3
BEFORE YOU PROCEED
Carefully read and follow all instructions in this and any
accompanying materials to prevent serious damage to your
model. Failure to follow these instructions will be considered
abuse and/or neglect.
Before running your model, look over this entire manual and
examine the model carefully. If for some reason you decide it is not
what you wanted, then do not continue any further. Your hobby
dealer absolutely cannot accept a model for return or exchange
after it has been run.
Warnings, Helpful Hints, & Cross-References
Throughout this manual, you’ll notice warnings and helpful hints
identified by the icons below. Be sure to read them!
An important warning about personal safety or avoiding
damage to your model and related components.
Special advice from Traxxas to make things easier
and more fun.
Refers you to a page with a related topic.
SUPPORT
If you have any questions about your model or its operation,
call the Traxxas Technical Support line toll-free at:
1-888-TRAXXAS (1-888-872-9927)*
Technical support is available Monday through Friday from 8:30am
to 9:00pm central time. Technical assistance is also available at
Traxxas.com. You may also e-mail customer support with your
question at [email protected]. Join thousands of registered
members in our online community at Traxxas.com.
Traxxas offers a full-service, on-site repair facility to handle any
of your Traxxas service needs. Maintenance and replacement
parts may be purchased directly from Traxxas by phone or online
at BuyTraxxas.com. You can save time, along with shipping
and handling costs, by purchasing replacement parts from your
local dealer.
Do not hesitate to contact us with any of your product support
needs. We want you to be thoroughly satisfied with your new model!
Traxxas
6200 Traxxas Way
McKinney, TX 75070
Phone: 972-549-3000
Toll-free 1-888-TRAXXAS
Internet
Traxxas.com
E-mail: [email protected]
Entire contents ©2014 Traxxas.
Traxxas, Ready-To-Race, Ready-
To-Win, Nitro 4-Tec 3.3 and
ProGraphix are trademarks or
registered trademarks of Traxxas.
Other brand names and marks are
the property of their respective
holders and are used only for
purposes of identification. No
part of this manual may be
reproduced or distributed in print
or electronic media without the
express written permission of
Traxxas. Specifications are subject
to change without notice.
*Toll-free support is available to U.S. residents only.
3x14mm
buttonhead
cap screws
3x10mm countersunk
cap screws
Foam
Bumper
Installing Rear
Body Mounts
4
REGISTERING YOUR MODEL
In order to serve you better as our customer, please
register your product within 10 days of your purchase
online at Traxxas.com/register.
T r a x x a s . c o m / r e g i s t e r
3x14mm
buttonhead
cap screws
3x10mm countersunk
cap screws
Foam
Bumper
Installing
Front Body
Mounts
INSTALLING THE BODY MOUNTS
The body mount parts are located in a separate
bag with your instructions. The front body mount
posts attach to the front bumper with 3x10mm
countersunk cap screws. Slide the foam bumper
over the front mounts, as shown in the drawing.
The excess length of the mounts should be
trimmed off after the body is installed. The rear
body mounts attach as shown in the illustration.