beautypg.com

Adjusting the metronome volume – Casio AP-24 User Manual

Page 19

background image

E-15

3

Change the tempo setting as described below.

• A note does not sound when you press a keyboard

key while holding down the CONTROL button
(Figure d).

• While holding down the CONTROL button, press

keyboard key A

2

(–) to decrease tempo or B

2

(+) to

increase it. Holding down either keyboard key
changes the setting at high speed. Pressing keyboard
key A

2

(–) and B

2

(+) at the same time changes the

tempo setting to 120.

• You can also change the tempo setting (beats per

minute) by holding down the CONTROL button and
using keyboard keys B

2

through A

3

to input values

from 0 to 9 (Figure c). You can input a two-digit or
three-digit tempo value. Note that the tempo value
you input is applied when you release the CONTROL
button. The tempo setting does not change if you
input a one-digit value or a value that is outside of
the allowable setting range.

• The tempo can be set within the range of 30 to 255

(beats per minute).

4

When you want to stop the metronome, press the
METRONOME button again.

• Pressing the METRONOME button again restarts the

metronome sound using the current beat and tempo
setting.

• If you want to change both the tempo and the beat

before restarting the metronome, perform the above
procedure here.

NOTE

• You can change metronome beat and tempo settings at

any time, even while the metronome is sounding.

• You can also use the metronome in combination with

memory play. See the section of this User’s Guide
covering the function for details.

Adjusting the Metronome Volume

Use the following procedure to increase and decrease the
volume of the metronome beat.

To adjust the metronome volume

1

While holding down the CONTROL button, use
the keyboard’s B

1

(–) and C

2

(+) keys to adjust the

volume level (Figure a). The setting range is 000
to 127.

*

A note does not sound when you press a keyboard
key while holding down the CONTROL button.

NOTE

• The metronome volume is automatically set to 110

whenever you turn on the digital piano.

Basic Operation

420A-E-019A