Touchstone 80004 Sideline Fireplace - Manual (Page 7)

6
INSTRUCTION FOR REMOTE CONTROL AND SWITCH PANEL (cont)
Simulated flames Press either the 〝+〞or the〝-〞button, the indicator light will brighten up or
dim the flames.
Timer This sets the timing for switching the fireplace off automatically. The timer’s duration ranges
from 0.5 to7.5 hours. The lighting up shown on the LED indicator indicates the setting of the timer.
Remote Control Device It is operated by AAA(#7)batteries(not included). Point it directly towards the
fireplace and it functions within a distance of approx 10 ft. The functions are similar to that of the Control
Panel.
CLEANING THE EXTERIOR OF THE APPLIANCE
1. Before cleaning the appliance, disconnect it from the socket and allow the fireplace to cool.
2. You can clean the exterior of the heater with a soft, damp cloth.
3. Do not use cleaning or polishing products.
MANUFACTURERS WARRANTY
There is guarantee of one year. During this period, faulty components will be repaired or replaced free of
charge, if the fault is due to a manufacturing defect.
In this case, please contact Touchstone Home Products at 800-215-1990.
TECHINCAL DATA
80004:
Rated Voltage: 120V～
Rated Frequency: 60Hz
Rated Power: 1500W
LED Lights: 12 1W led light bulbs (max. 12W)
WEEE：
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact you local government for information regarding the collection systems available. If electrical
appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater
and get into the food chain, damaging your health and well-being.