Toa IR-310BC - Manual (Page 2)

2
When the Unit is in Use
• Should the following irregularity be found
during use, immediately switch off the power,
disconnect the power supply plug from the AC
outlet and contact your nearest TOA dealer.
Make no further attempt to operate the unit in
this condition as this may cause fire or electric
shock.
· If you detect smoke or a strange smell
coming from the unit
· If water or any metallic object gets into the
unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged
(exposure of the core, disconnection, etc.)
• To prevent a fire or electric shock, never open
nor remove the unit case as there are high
voltage components inside the unit. Refer all
servicing to your nearest TOA dealer.
• Do not place cups, bowls, or other containers
of liquid or metallic objects on top of the unit.
If they accidentally spill into the unit, this may
cause a fire or electric shock.
• Do not insert nor drop metallic objects or
flammable materials inside the battery
charger or its infrared microphone receptacle,
as this may result in fire or electric shock.
• Do not touch a power supply plug during
thunder and lightning, as this may result in
electric shock.
• Stop charging if the batteries are not fully
charged within 3 hours. Failure to do so may
cause the batteries to fire, explode, leak, or
heat.
When Installing the Unit
• Never plug in nor remove the power supply
plug with wet hands, as doing so may cause
electric shock.
• When unplugging the power supply cord, be
sure to grasp the power supply plug; never
pull on the cord itself. Operating the unit with
a damaged power supply cord may cause a
fire or electric shock.
• When moving the unit, be sure to remove
its power supply cord from the wall outlet.
Moving the unit with the power supply cord
connected to the outlet may cause damage
to the power supply cord, resulting in fire or
electric shock.
• Avoid installing the unit in humid or dusty
locations, in locations exposed to the direct
sunlight, near the heaters, or in locations
generating sooty smoke or steam as doing
otherwise may result in fire or electric shock.
When the Unit is in Use
• If dust accumulates on the power supply plug
or in the wall AC outlet, a fire may result.
Clean it periodically. In addition, insert the
plug in the wall outlet securely.
• Unplug the power supply plug from the AC
outlet for safety purposes when cleaning or
leaving the unit unused for 10 days or more.
Doing otherwise may cause a fire or electric
shock.
• Use the dedicated AC adapter for the unit.
Note that the use of other adapter may cause
a fire.
• Avoid charging microphones installed
with rechargeable batteries other than the
dedicated IR-200BT battery. Charging any
other than the specified battery could result in
fire or personal injury due to battery rupture.
• When the infrared wireless microphone is not
in use for 2 weeks or more, be sure to take
the batteries out of the microphone because
battery leakage may cause a fire, personal
injury, or contamination of environment.
• Make sure to observe the following handling
precautions so that a fire or personal injury
does not result from leakage or explosion of
the battery.
· Be sure to use only the rechargeable battery
designed for use with the infrared wireless
microphone
· Do not short, disassemble, heat nor put the
battery into a fire.
· Do not solder a battery directly.
· Note correct polarity (positive and negative
orientation) when inserting a battery in the
unit.
· Avoid locations exposed to the direct
sunlight, high temperature and high humidity
when storing batteries.
Indicates a potentially hazardous situation
which, if mishandled, could result in moderate or
minor personal injury, and/or property damage.
CAUTION