Toa S5-ADU - Manual (Page 7)

7
3
2
Step 1. Remove 3 case holding screws (M3 x
6) from the left hand side (viewed from
front) of the unit’s case, then mount the
rack mounting bracket using the screws
as shown at right.
Step 3. Fit extension cables into the front panel of long mounting bracket as shown below, then tighten the
BNC connectors with nuts. Put plastic blank plug(s) in unused antenna input connector(s).
7.2. When mounting one S5-ADU unit with front mount antenna inputs in a 19" rack
Step 2. Remove 3 case holding screws (M3 x 6) from the right hand side of the unit’s case (viewed from front),
and mount the long mounting bracket (having 2 antenna inputs) using the screws.