Toa MT-200 - Manual (Page 3)

5.1.1. Mounting position
Mount the matching transformer MT-200 in the speaker system's rear mounting plate.
Rear mounting plate
HX-5 series
Rear mounting plate
HX-5 series
[Mounting to horizontally-positioned speakers] [Mounting to vertically-positioned speakers]
Use the rear mounting plate with its orientation pre-fixed
at the factory. Remove and attach the rear mounting plate so that its
orientation is as illustrated.
5.1.2. Mounting to the rear mounting plate
Mount the MT-200 in either way (A) or (B) as illustrated below.
Note
When mounting it to the outdoor speaker HX-5B-WP or HX-5W-WP, select either way (A) or (B) to keep the
inclination of the MT-200's top surface within 45° from the vertical axis.
Exceeding this angle range could deteriorate the MT-200's water resistant capability.
Tip
For mounting to the indoor speaker HX-5B or HX-5W,
both ways (A) and (B) are allowed.
Rear mounting plate
Top surface Hexagon head bolt
M8 x 15 with washer
(accessory)
A
B
Matching transformer
MT-200 45°
45°
UP
5.2. Mounting to the HX-7 Series Speaker System
Note
Prepare an optional HY-MT7 Matching Transformer Adapter when mounting the MT-200 to the HX-7 series
speaker.
For mounting method, refer to the installation manual supplied with the HY-MT7.