Toa E-232 - Manual (Page 4)

4
• When unplugging the power supply cord, be sure to
grasp the power supply plug; never pull on the cord
itself. Operating the unit with a damaged power
supply cord may cause a fire or electric shock.
• When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
• Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke
or steam as doing otherwise may result in fire or
electric shock.
• Be sure to follow the instructions below when rack-
mounting the unit. Failure to do so may cause a fire
or personal injury.
· Install the equipment rack on a stable, hard floor.
Fix it with anchor bolts or take other arrangements
to prevent it from falling down.
· When connecting the unit's power cord to an AC
outlet, use the AC outlet with current capacity
allowable to the unit.
· The supplied rack-mounting screws can be used
for the TOA equipment rack only. Do not use them
for other racks.
· When installing the unit in a rack other than that of
TOA, be sure to use the screws with a diameter of
over 5 mm and length of over 20 mm to mount the
unit. Failure to do so may cause personal injury.
When the Unit is in Use
• If dust accumulates on the power supply plug or
in the wall AC outlet, a fire may result. Clean it
periodically. In addition, insert the plug in the wall
outlet securely.
• Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instruction in the literature accompanying the
appliance.
3. GENERAL DESCRIPTION
The TOA E-232 is a 19" rack mountable (1 unit size), dual-channel 2/3 octave graphic equalizer.
4. FEATURES
• Dual-channel construction. 14 filters per channel on 2/3 octave center frequencies from 40 Hz to 16 kHz.
• Allows fine audio adjustment because each bandwidth (Q) remains constant whatever the equalization
amount is.
• Provides either 12 dB or 6 dB boost or cut per channel.
• Gain control (+12 dB to –12 dB), high-pass filter (–12 dB/octave and variable from 15 Hz to 300 Hz), EQ switch
(ON/OFF) and peak indicator per channel.
• Automatic equalizer bypass function provides complete signal bypass of this equalizer in the event of an AC
power loss, allowing the sound output to be maintained.
• Security cover is included.
L’éclair accompagné d’un symbole représentant une pointe de flèche à l’intérieur d’un triangle équilatéral
avertit l’utilisateur de la présence d’une “tension dangereuse” à l’intérieur de l’enceinte du téléviseur,
dont la magnitude peut être suffisante pour constituer un risque de choc électrique pour les personnes.
Le point d’exclamation à l’intérieur d’un triangle équilatéral avertit l’utilisateur de l’existence
d’instructions d’utilisation et d’entretien (réparation) dans la documentation fournie avec l’appareil.