Toa WT-5100 - Manual (Page 5)

5
7. WHEN OPERATING ON RECHARGEABLE BATTERY
Notes
• When operating on rechargeable batteries, the optional BC-5000-2, BC-5000-6, or BC-5000-12
Battery Charger is required.
• For rechargeable batteries, be sure to use the optional WB-2000 battery. Do not use other
batteries.
[How to Charge]
Step 1. Set the WT-5100’s power switch to the OFF
position.
Note
Be sure to turn off the WT-5100's power
switch when charging. Batteries cannot be
correctly charged if the power switch is ON.
Step 2. Place the WB-2000 rechargeable battery in
the WT-5100.
Step 3. Fully insert the WT-5100 into the receptacle
of the Battery Charger.
The Battery Charger's charging indicator
lights red and charging begins.
Charging is completed in approximately 3
hours and the Battery Charger's full-charge
indicator lights green.
Notes
• If the red charging indicator does not light
even if the WT-5100 has been inserted into
the charger, check to see if the WT-5100
has been correctly inserted.
• The WT-5100 becomes warm after charging
completion, however this is not a failure.
Note: For more information, please read the instruction manual enclosed with the Battery Charger.
When charging, never insert rechargeable batteries other than the
specified WB-2000 battery in the WT-5100.
Charging any other than the WB-2000 battery may result in fire or
personal injury due to battery rupture.
CAUTION
Charging indicator (red)
Full-charge indicator (green)
Power switch
1
3
Note
Can be placed in either
backward looking or
forward looking
orientation.