Toa A-230 CE-GB - Manual (Page 6)

6
1 2 6 7 3 4 5
5. NOMENCLATURE AND FUNCTIONS
5.1. Front
1. Power switch
Press to turn on the power.
Press again to turn off the power.
2. Power Indicator
Lights green when power is switched ON.
3. Microphone Volume Controls
Adjust the microphone level.
4. AUX Volume Controls
Adjust the AUX level.
5. Bass Control
Adjusts bass response. Rotate counterclockwise
to reduce it. The maximum position "0" provides
flat characteristics.
6. Treble Control
Adjusts treble response. Rotate counterclockwise
to reduce it. The maximum position "0" provides
flat characteristics.
7. Signal Indicator
Lights green when power is switched ON, and
indicates an output signal level.
8 9 10 11 12 13 14
5.2. Rear
8. AC Power Cord
Connects to an AC power source.
9. Output Terminals
Connect to speakers. When connecting speakers,
use only one of the speaker output terminals, low
or high impedance.
10. Terminal Cover
To avoid electric shock due to high voltage from
output terminals, replace the terminal cover after
connection completion.
11. AUX 1 and AUX 2 Input Terminals
–20 dBV (100 mV), 10 kΩ, unbalanced,
monaural RCA pin jacks. Accept external
equipment output signal.
(Refer to Input Connection for details.)