Toa DA-500F-HL CU - Manual (Page 18)

18
13. CLEANING THE FILTER
Step 1. Turn off this unit's Power switch.
Step 2. Remove the ventilation panel as shown in the figure.
Step 3. Detach the filter inside the ventilation panel.
Step 4. Clear the filter of dust.
Step 5. Replace the filter and ventilation panel.
Detach the panel by pressing
on the right side.
Filter
Ventilation Panel
Ventilation Panel
2
3
14. DIMENSIONAL DIAGRAM
465 (18.31)
442 (17.4)
76.2
(3)
88.4
(3.48)
482 (18.98)
371 (14.61)
22.5
(0.89)
404.2 (15.91)
Unit: mm (inches)
To protect the input level control from accidental operation,
it is recommended to replace the control knob with the
supplied tamper-proof cap as illustrated.
Input level control
Tamper-proof cap
(accessory)
12. TAMPER-PROOF CAP ATTACHMENT