Toa A-1724 - Manual (Page 11)

11
12. SPECIFICATIONS
Model No. A-1706 A-1712 A-1724
Power Source 220 – 230 V AC or 240 V AC, 50/60 Hz
Rated Output 60 W 120 W 240 W
Power/Current Consumption 150 W (rated output), 258 W (rated output), 532 W (rated output),
60 W (EN60065) 105 W (EN60065) 220 W (EN60065)
Under 150 mA (when Under 320 mA (when Under 60 mA (when
power switch is OFF) power switch is OFF) power switch is OFF)
Frequency Response 50 – 20,000 Hz (±3 dB)
Distortion Under 2% at 1 kHz, rated power
Input MIC 1 – 6: –60 dB* 1 , 600 Ω, electronically-balanced, combined type of
XLR-3-31 equivalent and phone jack
AUX 1 – 2: –20 dB* 1 , 600 Ω, electronically-balanced, combined type of
XLR-3-31 equivalent and phone jack
(Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)
AUX 3 – 4:
–20 dB* 1 , 10 kΩ, unbalanced, RCA pin jack
AUX 5: –20 dB* 1 , 10 kΩ, unbalanced, combined type of XLR-3-31
equivalent and phone jack
PWR AMP IN: 0 dB* 1 , 600 Ω, unbalanced, RCA pin jack
(An equalizer or other signal processor connectable between LINE OUT
and PWR AMP IN terminals)
Output REC: 0 dB* 1 , 600 Ω, unbalanced, RCA pin jack
LINE: 0 dB* 1 , 600 Ω, unbalanced, RCA pin jack
SPEAKER SELECTOR: 2 zone, high impedance* 2 (100 V line), individual
selector key, M4 screw terminal* 3
DIRECT SPEAKER OUT: High impedance* 2 (100 V line), M4 screw terminal* 3 ,
Low impedance (4 – 16 Ω), M4 screw terminal* 3
Note: Both Low and High impedance terminals cannot be used at the same time.
Phantom Power ON or OFF for each MIC 1 – 6 with switch setting
S/N Ratio Over 100 dB (Master volume: min)
(Band Pass: 20 – 20,000 Hz) Over 76 dB (Master volume: max)
Over 60 dB (MIC 1 – MIC 4)
Over 53 dB (MIC 5, MIC 6)
Over 76 dB (AUX 1 – AUX 5)
Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input REMOTE VOLUME: M3 screw terminal* 3
POWER REMOTE: No-voltage make contact input
Open voltage: 28 V DC (when the unit's power is OFF)
Short-circuit: Under 10 mA, M3 screw terminal*
3
Indicator 5-point LED output level meter, Power indicator LED, Zone indicator LEDs
Operating Temperature –10°C to +40°C
Finish Panel: ABS resin, black, hair line
Case: Steel plate, black
Dimensions 420 (w) x 107.7 (h) x 367 (d) mm
Weight 9.3 kg 12.6 kg 13.5 kg
* 1 0 dB = 1 V
* 2 167 Ω (A-1706), 83 Ω (A-1712), 42 Ω (A-1724)
* 3 Distance between barriers on the above screw terminals: 7 mm (M3 screw), 9 mm (M4 screw)
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
AC power cord ................................................. 1
Terminal cover ................................................. 1
Terminal cover mounting screw (M4 x 8) ......... 2 • Optional products
Rack mounting bracket: MB-25B
Volume control cover: YA-920
Perforated panel:
PF-013B