TL Audio A2 User Manual
Page 20
19
Equaliser:
LF: +/-15dB @ 80Hz, shelving,
Mid: +/-15dB, swept 150Hz to 7KHz, Q = 0.7,
HF: +/-15dB @ 12KHz, shelving,
“Pre” and “Sidechain” (Compressor) switches.
Metering:
Tube “Drive” LEDs: Variable intensity over 10dB level range, typically corresponding
to 1% to 5% THD.
Tube “Peak” LEDs: Dependant on level and drive, typically corresponding to 10%
THD.
Output “Peak” LEDs: +19dBu on output.
VU Meter: Switchable to Channel A or B, Input or Ouput, and Gain Reduction.
Nominal calibration: 0VU = +4dBu.
+10dB switch calibration: 0VU = +14dBu.
Power Requirements:
Internally set to 230V 50Hz or 115V 60Hz operation,
Detachable IEC power cord,
Power consumption 32VA.
Dimensions:
2U, rack mounting or free-standing.
W x H x D = 483mm x 88mm x 200mm (19.0” x 7.9” x 3.5”), behind front panel.
Shipping weight: 6Kg.
The above specifications are typical values, and do not represent limits for any particular unit.
These specifications are subject to change without notice.