TL Audio A2 - Manual (Page 19)

18
SPECIFICATIONS
Line Inputs:
Discrete Class A circuitry from input to output (unless Tube stage In),
Gain Range: -20dB to +20dB,
Maximum Input level: +26dBu,
Frequency Response: 10Hz to 40KHz, +0, -0.5dB,
Distortion: 0.007% @ 1KHz, +4dBu @ 0dB gain,
Distortion (THD + Noise): 0.025%, 10Hz to 40KHz,
Noise: -94dBu, 22Hz to 22KHz, @ 0dB gain at input and output.
Outputs:
Gain Range: +/-20dB,
Maximum Level: +22dBu (2Kohm load), +26dBu (10Kohm load),
Tube Stage:
Typical Distortion: 1% to 10%, depending on “Drive” level, predominately
second harmonic,
Noise: -88dBu (22Hz to 22KHz), output gain @ 0dB.
Compressor:
Threshold Range: -20dB to +10dB,
Ratio Range: 2:1 to 20:1,
Attack: 1ms (“Fast”), 8ms (“Slow”),
Release: 200ms (“Fast”), 2s (“Slow”),
Knee: “Hard” and “Soft” settings,
Gain Make-Up: 0dB to 20dB