THORENS TD 160 HD - Manual (Page 28)

Place the record player onto a stable foundation and af-
ter the final position has been achieved make sure that
the plinth is fairly level. For any fine-adjustments turn the
tip of each foot up or down until the plinth is in a perfect
horizontal position. This procedure is best controlled (and
to be corrected if necessary) with the help of the supplied
spirit level.
Take the RCA interconnect leads and plug them into the
designated (phono) input jacks at the rear panel of your
amplifier or receiver. Make sure that polarity (left/right
channel!) is correct.
HINT: if your amplifier lacks an integrated phono stage you
need to acquire a special external phono-preamplifier. For
amplifiers/receivers featuring a 5-pin DIN-socket at the
phono input section you will need a special adaptor (RCA
to DIN) which can be requested from your Thorens dealer.
Set up and Connections
28