THORENS TD 160 HD - Manual (Page 25)

Unpacking and Assembly
Carefully remove the unit and accessories from the
packaging.
Supplied items:
By observing the following hints your record play-
er can be mounted within only a few minutes.
1 x plinth (with/without tonearm)
1 x tonearm counterweight
1 x Thorens drive belt
1 x platter
1 x anti-static platter mat (2 parts)
1 x special bearing oil
1 x mounting jig for drive belt
1 x mains power adaptor
1 x set of RCA interconnecting leads
3 x RDC unit feet
1 x acryl dust cover
1 x sprit level (bubble)
1 x adaptor for single records
Attach the 3 RDC-feet at the underside of the plinth and
put the unit onto a level surface.
Now put five to eight drops of the supplied oil into the
bearing and then insert the axle with the thicker end first
(Fig. 1).
25
Fig. 1