THORENS TD 160 HD - Manual (Page 27)

The stems of the mounting jig are now to be turned in-
wards, one after the other (Fig. 3.1), whereupon the belt
will be freed and loop itself around the motor pulley. Re-
move the mounting jig as shown in Fig. 3.2. Turn the plat-
ter manually clock-wise several times in order to make sure
that the belt fits snugly around sub-platter and pulley.
Place the dedicated rubber-polymer mat onto platter (Fig.
3.3). The two pieces are to compensate vinyl records of
different thickness without having to alter tonearm height
(VTA; see page 31).
If your TD 160 HD has been delivered without tonearm
you may now proceed to mount and align the tonearm of
your choice according to the instructions supplied by its
manufacturer. Otherwise the mounting of your TD 160 HD
is complete and can now be set up and connected.
IMPORTANT: it is highly recommended to save the ship-
ping box and all packing material in case your record player
needs to be packed again for transportation. Thorens can-
not be held responsible for any damage that may occur
during transport owing to the record player not been prop-
erly packed
Fig. 3.1 Fig. 3.2
Fig. 3.3
27