TeeJet FieldPilot Install Miller Condor - Manual (Page 12)

10
www.teejet.com
FieldPilot ®
3. Mount the FieldPilot ValVe
Use remaining items (B & H) as well as bolts (F) to mount the FieldPilot valve to the bracket.
Figure 1-6: Mount the FieldPilot Valve
4. install Pressure hose
Locate the priority flow control valve, mounted to the inside rail of the front right cab support beam. It is on the
opposite side of the beam in which the FieldPilot Valve was installed. From the T on the bottom of the priority
flow control valve (Port 2), remove the pressure hose that leads to the left side of the machine feeding several
hydraulic accessories. The opposite side of this T leads to port 2 of a pressure relief valve. This pressure relief
valve is mounted just forward of and above the hydraulic reservoir tank.
Figure 1-7: Install Pressure Hose
B,F,H
Remove this hose from tee on bottom of
the priority flow control valve
pressure Relief Valve
priority Valve