TechniSat DiGYBOXX HD CX User Manual

Page 87

> Press the blue function key Functions. A selection window will be displayed, listing the available functions.
> Use the arrow keys up/down to mark the line Remove.
> Confi rm by pressing OK.
> Use the arrow keys or numeric keys to mark a programme you wish to remove from the list.
> Press the yellow function key Remove.
The programmes removed in this manner remain included in the Total list, and can be transferred back
to the Favourites list at any time.

9.1.5.1 Deleting from the Total list

To remove programmes from the Total list, proceed as described. After calling up the programme list ma-
nager, press the red function key Total list to switch to the Total list, then select the function Delete. The
message will be displayed: “Remove programme(s) from the list?”.
> Use the arrow keys left/right to mark Yes or No.
> Confi rm the entry by pressing OK.
Please note that programmes deleted from the Total list will also be deleted from all Favourites lists. They
will be available only after searching again.

9.1.6 Sorting programmes

To sort the order in which the programmes appear in your Favourites lists, call up the programme list
manager

9.1.7 EPG/SFI

Your receiver provides the facility to receive additional programmes with additional /EPGSFI electronic
guides.

9.1.8 Parental control

Your receiver is equipped with a parental control function. This means that there is a possibility to mark
selected programmes for global parental control or remove this option.

9.1.9 Returning from the programme list manager

When you have fi nished confi guring the programme list according to your preferences in this way, press
the Menu key to return to normal operation.

9.2 Programming the electronic programme guide

9.2.1 Updating

This chapter describes how you can switch the automatic EPG/SFI update on or oﬀ .
> Use the arrow keys left/right to switch this on if automatic updating is to be carried out at a set time.

If you do not wish to receive the additional data, it can also be switched oﬀ .

> To switch oﬀ data reception, set the item Updating to oﬀ

9.2.2 Updating time

> Use the numeric keys in the line Updating time to set the time when the automatic download of EPG/

SFI data is to be carried out.