TC-Helicon VSM-200P-XT Manual - Manual (Page 10)

10
Mic Stand Mounting
3. Place VoiceSoloXT on the mic stand so the stand goes
into the hole on the bottom of the VoiceSoloXT. If you
don’t need to mount VoiceSoloXT on a boom stand, you
are finished with your setup. If you require the boom,
continue to the next step.
4. The Mic Boom Mount is found in the bag of parts that
came with your VoiceSoloXT. There are two versions: a
thin one for European stands and a wider one for the
rest. This adapter connects the boom of your mic stand
with VoiceSoloXT. It is designed to fit into the top
receptacle in VoiceSoloXT.
5. Screw the Mic Boom Mount Attachment into your boom.
6. Lift the lid on VoiceSoloXT, and while holding it open,
slide the Mic Boom Mount attachment, on the boom into
slot on top of the monitor and let the lid close.