TC-Helicon Quintet Manual - Manual (Page 8)

6
FRONT PANEL
POWER KEY
On/Off switch for the unit.
In order for altered SETUP and
current preset parameters to be
saved, the unit must be
powered off using this switch.
Powering down by removing AC
power will result in loss of
changes to these parameters.
LINE INPUT LEVEL KNOB
Adjusts the Line Input level.
Range: 24dB
INPUT METER
Peak meter shows Input level.
The Meter range is: 0 to -40dB.
INPUT CLIP LED
Indicates that the input level is
too high, possibly causing digital
distortion. Reduce the input
level to correct this condition.
OUTPUT CLIP LED
Indicates an internal DSP
overflow. Reduce the overall
level of the harmony voices and
vocal effects to correct this
condition.
MIDI IN LED
Indicates valid incoming MIDI
information.
LCD TEXT DISPLAY
Displays top-level preset
information (preset recall
mode), detailed preset
information (edit menus),
system configuration (setup
menu), and any important status
messages or user alerts.
VOICE KEYS (1-6)
On/Off function to set voicing.
These keys allow you to select
the voicing of the four harmony
voices. A maximum of 4 of these
keys may be enabled at a time.