TC-Helicon VoiceLive Play Details Manual - Manual (Page 15)

15
Setup - Output
Output – Sets the way VoiceLive Play outputs sound via the XLR outputs .
There are 3 settings:
1 . STEREO – XLR outputs receive a stereo mix of all voices and other inputs .
2 . MONO – A MONO full-mix signal is on the LEFT and a DRY vocal is on the RIGHT . Any Tone
and Pitch Cor Amt settings from the Setup menu are included on the RIGHT DRY channel .
3 . DUAL MONO - A MONO effected voice signal (all voices) is on the LEFT and AUX is on the
RIGHT . This is great for sending music to one channel of a PA and Vocals to another, especially
in a Karaoke situation.
Vocal Cancel – Attempts to remove the vocals from a piece of music .
There are two settings:
1 . OFF – No processing is performed on the aux input .
2 . ON – Processing occurs to attempt to remove lead vocals from a piece of music . This pro
cess can create “Karaoke” style music for you to sing along to, including key information for
harmony generation. The processing capability can vary quite a bit from song to song, depend-
ing on the way the song was originally mixed .
Lead Mute – Mutes the Lead vocal and only outputs processed signals .
There are two settings:
1 . OFF – Lead vocals are routed to the main mix .
2 . ON – Lead vocals are removed from the main mix .
Digital Out Level – Controls the USB output level .
Headphone Lim – Controls the level at which the headphone output limiter engages .
Levels closer to 0db allow for louder headphone output levels.