TC-Helicon VoiceTone D1 Manual - Manual (Page 8)

Effect Descriptions
Doubling Styles - The following table offers an overview of the different factory styles.
Doubling is mostly used either to highlight a word, phrase or chorus. To use the effect for an entire
song, it’s a good idea to use a subtle style (Tight or Detune) or use a more obvious one (Loose, Group)
with a less wet mix level. That said, don’t be afraid to go wilder with Octaves or Shout!
The Dry/Wet (mix) control - Fully left, only your dry lead voice is heard. At the center notch is a
factory-set balance of doubling and dry for each style. Beyond the center notch, doubling level is
increased until your dry voice is gradually faded out at the end of its travel.
# of Voices Humanize Detune Porta
Tight 1 Low -6c Low
Loose 1 Med 0 Med
Group 2 Med 0 Med
Detune 1 Off 0, -12c Low
Thick 2 Med +/-12c Low
Oct Up 2X +1 Oct Med 0, -5c Low
Oct Down 2X -1 Oct Med 0, -5c Med
Shout 2: +/- 1 Oct High 0, -5c High