beautypg.com

SUUNTO SMART BELT User Manual

Page 6

background image

6

ACTIVATING AND RECORDING

Suunto Smart Belt is activated and starts recording automatically when you put it on and it
starts reading your heart rate. This is indicated after about 5 seconds by a medium beep and
a medium green flash.

After activation, the green light flashes every 4 seconds to show that the device is measuring
and recording your heart rate.

If the beep and green flash do not occur when you have put the Suunto Smart Belt on, make
sure that the belt fits snugly and that the electrodes are wet. If the orange or red light flashes,
the memory or battery is low. For more information, refer to Section 4 ERRORS AND
WARNINGS
.

1 medium, green

1 medium

activated, starts recording

1 green every 4 seconds

measuring and recording