SUUNTO S6 - Manual (Page 50)

48
Using the SkiChrono
To measure your speed on a slope:
1. Select the slope angle measurement shortcut on the bottom row.
2. Point to the bottom of the slope with Suunto S6.
3. Press Start to lock the slope angle.
4. When you start your run, press Start again to start the speed measurement.
Bottom row starts showing your average speed.
5. At the bottom of the slope, press Stop/CL. The bottom row shows the average
speed and the highest speed of the run.
6. If you continue riding the same slope and use the same slope angle, you can start
recording a new run directly by pressing Start. You do not need to reset the
SkiChrono or to measure the slope angle again.
7. If you ride a new slope and measure a new slope angle, reset the SkiChrono with
a long press of Stop/CL. Then press Stop/CL again to call the slope measurement
function and start again from step 1.