SUUNTO Elementum Terra - Manual (Page 6)

COMPASS
• Press [C] to enter.
• Keep [C] pressed to start the compass calibration.
• While calibrating compass, keep the device level and stabile when
rotating. ‘Level’ blinks on the display if the device is not level or
stabile.
• Press [B] or [C] to exit compass.
TIME/ALTITUDE RECORDING
Press [B] to switch between
time
and
altitude recording
mode.
STOPWATCH (CHRONOGRAPH)
1. In
time
mode, rotate [A] upwards to toggle between stopwatch
and date.
2. Press [A] to start/stop the stopwatch.
3. Keep [C] pressed to reset the existing time.
SETTINGS
1. In
time
mode, keep [A] pressed to enter/exit
settings
.
2. Rotate [A] to change the values.
3. Press [A] to accept.
4. Press [B] or [C] or keep [A] pressed to exit.