Sure Heat 2008 Four Seasons FSIS Natural Gas Conversion Kit - Manual (Page 2)

FSISLP Natural Gas Conversion Instructions
Tools needed:
Phillips head screwdriver
3/4” wrench
1/4” wrench or socket
Adjustable wrench
Wear golves to be protected from the sharp edges of the interior parts. ▲ !
▲ !
WARNING
Be sure gas supply is off, the knobs are in the off
position and the grill is cool.
NOTE: Make sure to use supplied pipe sealant on all non-flared fittings.
1. To get started, remove all the control knobs and set
aside. (See Fig. 1)
2. Use a 3/4” wrench to disconnect the regulator hose from
the manifold. (See Fig. 2)
3. Disconnect the two igniter wires from the outstand
terminal tabs as shown. (See Fig. 3)
Regulator hose
Fig. 1
Fig. 2
Fig. 3
Igniter wires
4. Remove the two (2) phillips pan head screws from the left
side of the control panel. (See Fig. 4)
Fig. 4
Phillips Pan
Head Screws
outstand tabs