Sure Heat Altima 30, 38, 48 - Manual (Page 8)

INSTALLATION / ASSEMBLY
6
Ignitor Attachment
1. Remove the ignitor cap, spring assembly, bat-
tery and lock nut from ignitor. (See Fig. 4)
2. Insert the threaded section of the ignitor into
the U-shaped cut out of the ignitor mounting
bracket. (See Fig. 5)
3. Insert the threaded section of the ignitor
through the hole in the shelf and secure to
shelf using the lock nut. (Use the ignitor
assembly diagrams to determine which
ignitor goes with which shelf depending on
grill model.) Tighten Securely. (See Fig. 6)
4. Re-insert the battery, positive side first, and
spring assembly and attach the ignitor cap.
(See Fig. 7)
5. Repeat above steps for second ignitor
AGR30PF Ignitor Assembly
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Left Shelf (Double Wire) Right Shelf (Single Wire)