Sure Heat 2008 Amana AM33 - Manual (Page 8)

ASSEMBLY INSTRUCTIONS
Step 1: Assemble Wheel Channels
1. Remove the four (4) caster assembly nuts and two (2) bolts from the wheel channel assemblies.
Note: The nuts and bolts are hand tightened to the wheel channels.
2. Set the cart base on the floor and then lay the wheel channel left on the left side and the wheel
channel right on the right side of the cart base. (The large hole in the cart base should be on the
right side.)
3. Pick up the left side of the cart base and set the wheel channel left in place by inserting the
attached bolts through the two (2) holes in the cart base.
4. Pick up the right side of the cart base and set the wheel channel right in place by inserting the
attached bolts through the two (2) holes in the cart base.
A. Cart base
B. Wheel channel left
C. Wheel channel right
A
B
C
8